K&N Introduces Typhoon® Intake Systems For The Infiniti® G35 Coupe And Sedan
- Nov 3, 2003
RIVERSIDE, CA – Like their Nissan® 350Z sibling, Infiniti® G35s turn heads every time they're out of their garages. Now K&N Engineering snaps G35 owners' heads farther back into the cars' headrests with its new Typhoon® intake systems. Dyno-testing on K&N's in-house Dynojet 248 revealed average drive-wheel gains of 9 HP for the G35 coupe Typhoon® (Part # 69-7080-1TS) and 4-5 HP for the sedan system (Part # 69-7081-1TS).
Although configured differently, both G35 kits combine aluminum intake tubing with a K&N FilterCharger® filter. Mandrel-bent 6061 aluminum provides maximum airflow, and this tubing is finished in the customer's choice of a polished surface and dual-stage powdercoated red, blue and silver. Air enters the Typhoon® systems through tapered round K&N FilterChargers®. These filters feature a single velocity-stack base, a black urethane cap and a filtration area made of oil-impregnated cotton-gauze over epoxy-coated aluminum wire mesh. FilterChargers® can be cleaned and re-oiled repeatedly with a K&N cleaning kit (sold separately). K&N Typhoon hose couplings are high-quality, multi-ply DuPont® Nomex®-reinforced silicone to withstand heat and vibration. All mounting hardware is stainless steel, including the barrel clamps that secure the silicone hose.
The G35 sedan Typhoon® is a short-ram style system that attaches to the engine's mass air sensor. For the G35 coupe kit, K&N devised a complete cold air system that draws air from behind the front fascia. This kit's intake tubing includes an aluminum mass-air sensor adapter that's completely TIG-welded. Because the filter is positioned low in the engine compartment, the G35 coupe Typhoon® includes a DryCharger® wrap for protection from small amounts of water and debris. This silicon-impregnated vinyl material repels water to keep it from entering the intake tract. In extremely wet conditions, the G35 coupe Typhoon® kit can easily be converted from the cold-air configuration to a short-ram style by mounting the filter directly to the inlet tube.
For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.
Although configured differently, both G35 kits combine aluminum intake tubing with a K&N FilterCharger® filter. Mandrel-bent 6061 aluminum provides maximum airflow, and this tubing is finished in the customer's choice of a polished surface and dual-stage powdercoated red, blue and silver. Air enters the Typhoon® systems through tapered round K&N FilterChargers®. These filters feature a single velocity-stack base, a black urethane cap and a filtration area made of oil-impregnated cotton-gauze over epoxy-coated aluminum wire mesh. FilterChargers® can be cleaned and re-oiled repeatedly with a K&N cleaning kit (sold separately). K&N Typhoon hose couplings are high-quality, multi-ply DuPont® Nomex®-reinforced silicone to withstand heat and vibration. All mounting hardware is stainless steel, including the barrel clamps that secure the silicone hose.
The G35 sedan Typhoon® is a short-ram style system that attaches to the engine's mass air sensor. For the G35 coupe kit, K&N devised a complete cold air system that draws air from behind the front fascia. This kit's intake tubing includes an aluminum mass-air sensor adapter that's completely TIG-welded. Because the filter is positioned low in the engine compartment, the G35 coupe Typhoon® includes a DryCharger® wrap for protection from small amounts of water and debris. This silicon-impregnated vinyl material repels water to keep it from entering the intake tract. In extremely wet conditions, the G35 coupe Typhoon® kit can easily be converted from the cold-air configuration to a short-ram style by mounting the filter directly to the inlet tube.
For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.
# # K&N # #
