Latest News

K&N is a Major Resource for Washable and Reusable Air Filters

K&N 33-3059 replacement air filter.

The panel-shaped K&N 33-3059 replacement air filter

No doubt you are aware that K&N Engineering is one of the largest suppliers of air filters for automobiles. However, you may not be aware that K&N supplies air filters for all types of applications. Our inventory covers Personal Automobiles, ATVs and Motorcycles, Off-Road Vehicles, Remote Control Vehicles, Marine Vehicles, Snowmobiles, Go Karts, Industrial and Small Engine Applications, Heavy Duty Diesel Equipment, Trucks, Racing Vehicles, Custom Built Vehicles, Motorhomes and Recreational Vehicles, Buses, Fire Engines, and Transport Vehicles, Refrigeration Equipment, Generators, Big Rigs

Constructed to be washable and reusable, the filters are offered with different media to assure the best performance for the particular application.

HD-1102 motorcycle replacement air filter

HD-1102 Harley Davidson motorcycle replacement air filter

Many K&N replacement air filters feature a multilayered cotton gauze media that has been treated with a special grade of oil that makes the strands of the cotton very sticky. The filter is designed to encourage high airflow with superior filtration. As more and more contaminants are captured, the airflow continues to pass through the cotton gauze with little if any restriction. Tests confirm that the overall filtration efficiency of the filter is in the range of 96% to 99%. Each K&N air filter is designed to boost horsepower, acceleration, and torque and lasts for at least 50,000 miles between cleanings.

Meanwhile, conventional paper air filters have a very thick surface area and are tightly compressed and dense so that they can meet the minimum filtration standards. This design restricts airflow. As the paper filter becomes more and more clogged, the air pressure inside drops while the pressure outside remains the same. This results in an excessively high pressure differential causing the dirt particles to push through the paper medium. Airflow decreases even more making it necessary to replace the filter.

E-4142 air filter.

E-4142 Briggs & Stratton air filter

On the other hand, conventional foam air filters lack appropriate surface area, which limits dirt holding ability. Dirt builds up on the outside of the foam filter and blocks openings. This results in higher vacuum pressure that distorts the cells and draws more dirt deeper into the filter. Airflow is restricted even more as the cells become clogged.

K&N also offers air filters with a synthetic non-woven material that are ideal for a wide range of applications including small industrial engines, compressors, generators, utility lawn, garden units and mowers as well as for heavy duty applications including large turbo diesel engines, class 6-8 over-the-road trucks, agricultural and earth moving equipment and diesel motor homes.

The commercial grade air filters include a new hybrid medium that combines the best characteristics of cotton and synthetic non-woven technologies. No oil is used in these filters. Instead, they feature a 3-D lofted filter surface that reduces diesel air filter restrictions. The result is more power and better engine efficiency.

99-0638 Heavy-Duty Air Filter Cleaner.

Heavy-duty air filter cleaner

K&N air filters for heavy duty commercial grade applications feature extra strength construction and are reinforced to last for up to 300,000 miles. These hybrid filters feature a thick lofted non-woven synthetic media that is co-pleated between two layers of powdercoated aluminum screen wire. The media is sandwiched between either molded urethane or steel plates and surrounded by a powdercoated steel cage to withstand extreme temperatures and pressures that can occur in large turbo diesel applications.

K&N offers air filter cleaners and filter cleaning accessories for its lines of oiled cotton and synthetic air filters. The cleaners are specially formulated to cleanse and recharge the filters so that they can be reused over and over again.

K&N backs the oiled cotton replacement air filters with a 10-year/Million Mile Limited Warranty that guarantees that the filter will last for up to 10 years or 1,000,000 miles without needing replacement.

Heavy-duty air filter.

38-2001S heavy-duty air filter

In addition, K&N offers cabin air filters that are designed to clean and refresh the passenger compartment of most cars. The filter is electrostatically charged to capture and hold all sorts of smelly and unhealthy contaminants including mold, mildew, pollen, spores, fungus, and germs.

The cabin air filters are designed to replace the factory cabin air filter from the cabin air filter box that is located under the hood, near the windshield, underneath the dashboard, or behind the glove box.

As in the case of the air filters, K&N also offers a cleaning kit that is formulated to recharge and cleanse the cabin air filter after every 12 months or 12,000 miles of driving, depending on driving conditions, so that it can be used over and over again for the life of the car.

The filters are designed to fit the factory air box and can be installed using common hand tools in just a few minutes.

Air filters can be found by part number or by vehicle manufacturer.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Sean Zeigler of Other Life Cycles Drops the F-Bomb at the Dallas IMS

Sean Zeigler's F-Bomb J&P Custom winner in the K&N Performer category side view

Zeigler's F-Bomb is a clean and pure cafe build

Before you think that Sean Zeigler is a potty-mouth, we should clarify. The F-Bomb is a clean and sanitary custom café racer that Zeigler created from a 1975 Honda CB550F Supersport. It doesn’t take a lot of detective work to identify where the name of the snow-white custom build came from. In Honda’s corporate vocabulary, the F indicated the CB was a sport version of the breed. For Zeigler it certainly means... fantastic... yeah, that must be it!

Zeigler’s rolling double entendre rode away with the K&N Performer Award at the Dallas edition of the Progressive International Motorcycle Show. The J&P Cycles Ultimate Builder Custom Bike Show has focused the spotlight onto several new talents in the bike-building world of which Zeigler is one.

When we asked him about his history in the craft, Zeigler revealed just how brief his tenure in the field has been. “In short, this is the first build out of my little home garage shop, with the exception of a few vintage Vespa projects,” Zeigler said. Clearly he has a unique talent for his new-found form of creative expression.

Sean Zeigler's F-Bomb J&P Custom winner in the K&N Performer category rear view

The smooth body work and paint combine perfectly with touches like the recessed taillights

Zeigler revealed that the motivation for the fantastic build was more therapeutic than anything else. That little gem of a custom helped him get through a rough spell in his life.

“My work life was kinda stale, my mom was sick, and I really just wanted to build a motorcycle, plain and simple,” Zeigler noted. “I had been working on vintage Vespa builds for several years, and when a friend of mine bought a motorcycle, I thought ‘well I could build that’ and so I did.”

The end result of that inspiration is pure, elegant simplicity. Clean lines define Zeigler’s build. The F-Bomb is an uncluttered, even skeletal, work of café art. Zeigler’s personal favorite elements of the build are the subtle details that create the whole.

“There are so many little details,” said Ziegler. “But my favorites are the custom hand-made alternator cover, the RFID on/off, the modified forks, and the recessed brake lights and tail.”

Sean Zeigler's F-Bomb J&P Custom at the Dallas International Motorcycle Show

F-Bomb made a serious bang at the Dallas IMS

The bodywork on the F-Bomb is crafted to café perfection. The hand-made custom seat-pan and smooth-sculpted tail section work perfectly with the CB tank. The entire motif is completed with the white paintjob capped off with a retro-cool blue racing stripe.

The 4 into 1 exhaust is minimalist and all-business. That header is finished in matte black, as are the spoked rims. The engine, which Zeigler rebuilt with new seals and rings, is left relatively original. Of course, the F-Bomb wears the requisite café rear-set foot controls and low clip-on handlebars.

While F-Bomb is Zeigler’s first custom motorcycle build, it is certainly not going to be his last. It is also clear that he will not be boxed into a certain genre of custom.

Sean Zeigler's F-Bomb J&P Custom engine

The custom engine cover, clean headers, and nice rear-sets add to the cafe build

“I hope to debut my next completed build in February. I have been posting updates on Instagram of it under the hashtag #supermotoscramblerstein. As you can imagine from that hashtag, it is not a café,” said Zeigler. “The base is a 1981 GL500 but I am mixing in a little 2001 Suzuki DRZ 400. So far it is looking pretty nifty to me, and I hope when I get to show it off as a complete build it will turn a few heads.”

This new passion clearly has Zeigler thirsty for more, and he wouldn’t mind at all sharing it with new friends. “If you are looking for someone who will build a bike with you, that is the whole goal of this adventure for me. I have a few donor bikes available and welcome anyone interested in a build from me.”

K&N gives Sean Zeigler a big ‘thumbs up’ on his success with F-Bomb. We are proud to help new builders get the recognition they deserve!

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

2014-2016 VWs, Skoda, and Seat Air Filter is Washable and Reusable

K&N 33-3044 air filter for the 2014-2016 Polo, Fabria, Rapid, Ibizza and Toledo.

The K&N 33-3044 air filter fits 2014-2016 VW Polo, Skoda Fabia and Rapid, and Seat Ibizza and Toledo

There are two things that the Seat Ibiza V and Toledo IV, Skoda Fabia and Rapid and Volkswagen Polo have in common. They are all manufactured by carmakers that are a part of the Volkswagen Audi Group and they all can use the K&N 33-3044 replacement air filter. The Volkswagen Audi Group signed a co-operative agreement with Seat, a Spanish auto manufacturer in September 1982 and acquired 51% of the company in 1986 and the group signed a joint venture agreement with and purchased 30% of Skoda, an automobile manufacturer based in Czechoslovakia. By December 1995, the group had a 70% share of the company.

In 2014 the Volkswagen Polo went through a modest facelift that included a lot of new safety technology and the creation of more efficient engines. The model received an automatic post-collision braking system and buyers have the option to include adaptive cruise control with front assist and city emergency braking. In addition, a new infotainment system that included a screen that works like a smartphone was incorporated into the vehicle. The infotainment system controls the stereo, mobile phone and the optional satellite navigation system. Also included is a MirrorLink system that permits the integration of a smartphone into the car and also permits the screen to display all of the apps on the phone for easy touchscreen control.

The old 1.4-liter engine was replaced with two 1.0-liter and 1.2-liter gasoline engines with the 1.2-liter featuring turbochargers. The 1.2 offers 109-bhp and the new 1.0-liter is a three-cylinder gasoline engine that produces 59 –bhp. Buyers who wanted an automatic gearbox had to acquire a Polo with a 1.2-liter TSI engine. Those who bought the BlueGT Polo model that includes a 1.4-liter gasoline engine that offers 148-bhp that is mated to a six-speed manual or seven-speed DSG dual-clutch gearbox. In addition, a 1.4-liter turbocharged diesel was available.

The Polo with the three-cylinder gasoline engine and five-speed manual transmission offers 59bhp at 5,000-6,000 rpm and 70-lb-ft of torque at 3,000-4,300 rpm. Top speed is 100 mph and it could achieve 0-62 mph in 15 seconds. The 2015 Volkswagen Polo has an Inline-4 engine that offers 60-horsepower at 5,000 rpm. The 1.0-liter engine achieves 0 to 60 in 8 seconds and has a top speed of 136-mph. The 2015 Polo exterior was mildly refreshed without any dramatic changes. The length is 156.37-inches (3,972mm); wheelbase is 97.24-inches (2,470mm); width is 66.22-inches (1,682mm) and the height is 57.20-inches (1,453mm).

Two three-cylinder gasoline engines and one three-cylinder TSI engine power the vehicle. One of the gasoline engines is a 1.0-liter engine with multi-point injection that delivers 60-horsepower and 95 Nm of torque at 3,000-4,300 rpm; the other three-cylinder gasoline engine is a 1.0-liter multi-point injection engine that generates 75-horsepower and 95 Nm at 3,000-4,300 rpm. The TSI is a 1.0-liter direct injection and turbocharger engine that produces 94-horsepower and 160 Nm at 1,400-4,000 rpm.

The 2016 Volkswagen Polo includes a standard 6.5-inch touchscreen, a reverse-view camera and an App-connect USB interface for Apple CarPlay and Android Auto functions. The Driving Comfort Package includes adaptive cruise control, front assist brakes with city emergency braking, climate control, auto headlights and wipers, auto-dimming rear-view mirror, driver fatigue detection system, and a low tire pressure indicator. A Sport Pack trim adds 17-inch alloy wheels, lowered sports suspension, tinted side and rear windows, front fog lights with cornering function and a tire pressure monitor. There is also a stop-start system and hill start assist.

The 2015 Skoda Rapid keeps all of the updates that first appeared on the 2014 model including the brown and beige interior. The plastic feels more premium than many other cars in this category. The stock Rapid does not include a touchscreen infotainment system nor a navigation system. However, it does include a cruise control for the first time. A 1.5-liter common rail turbo-diesel engine powers the vehicle that delivers 105 PS of power at 4,400 rpm and 250 Nm of torque between 1,500 to 2,500 rpm. The diesel engine comes with two gearbox options –- a 5-speed manual and a 7-speed dual clutch automatic. The 2016 Skoda Rapid includes an interior with fabric covered seats and dashboard. It does not have a touchscreen. However, the Black Edition includes cruise control.

The 2015 Skoda Fabia is 65 kilograms lighter than the previous year’s model and is powered by a three-cylinder engine that weighs 980kg. The car is also 8mm shorter, 90mm wider and 31mm lower than it predecessor. Five engines were available worldwide to power the car. However, only two engines were available in Australia, both of them being a 1.2-liter turbocharged gasoline engine shared with the VW Polo. There have been some refreshing done on the exterior of the car including buffed-up shoulder line and contoured hood and different colored wheels, mirrors and roof was available. The cabin has also been upgraded over the previous model with the plastics feeling more premium than the 2014 model.

The 2016 Skoda Fabia went through a major refreshing. The wheelbase has been increased by 5mm, yet the car is 8mm shorter overall than the 2015 model. The SE-L trim gets LED daytime running lights, fog lights, and 16-inch alloy wheels. The SE trim gets 15-inch alloys and the S Trim rides on steel. The third generation Fabia also includes a bulge in the hood. A 1.2-liter turbocharged engine powers the car and delivers 89 bhp. There is also a new 1.4-liter TDI diesel engine that offers 89 and 104 BHP, which has a better CO2 emission rating. Three transmissions are available – 7-speed dual-clutch automatic, 5 and 6-speed manuals.

The front-drive chassis is equipped with front MacPherson struts and a rear torsion bar and the whole suspension is guided by electric steering instead of a hydraulic that was on the previous model. The 2015 Seat Toledo went through a major refreshing receiving LED headlights and the taillights were redesigned to make them more similar to the Seat Ibiza. There is also a new multifunctional steering wheel and brushed aluminum trim pieces, one on the dash and the other on the radio surround. The 5-door car is 4.48-meters long and has a wheelbase of 2,602mm. Two engines are available to power the car – a 1.2-liter TSI that generates 85 and 105 horsepower, a 1.4-liter TSI that delivers 122-horsepower and a 1.6-liter TDI diesel that delivers 90 or 105-horsepower.

The 2015 Seat Ibiza was refreshed. The car benefited from its manufacturer’s association with the Volkswagen Group. The dull plastics in the cabin of the car have been replaced with softer materials as well as a functional digital display. Changes in the SE trim are a great example of the upgrade. This particular trim received an air conditioner and new infotainment system that is compatible with Apple CarPlay and Android Mirror Link. A 1.0-liter three-cylinder turbo engine that generates 94 bhp powers the car and its mated to a 5-speed manual transmission. 0 to 62-mph is achieved in 10.4-seconds and top speed is 119- mph.

The 2016 Seat Ibiza is the manufacturer’s biggest-selling model. All models in this incarnation of the Ibiza include alloy wheels. There is a USB input and a small jack plug above the slot for an MP3 player. The car uses the same engines that power the Volkswagen Polo. There are two versions of a three-cylinder 1.2-liter, one 1.2-liter TSI, a 1.4-liter and a 1.4-liter TSI. The E trim is the entry-level model and includes the 1.2-liter engine. The S has an air conditioner. There are also the SE, Sport, FR and Cupra and special edition Bocanegra in order of performance.

The K&N 33-3044 air filter is designed to replace the factory air filter found in the 2014-2016 Seat Ibiza V and Toledo IV, the Skoda Fabia and Rapid, and the Volkswagen Polo.

The filter is washable and reusable and lasts up to 50,000 miles between cleanings, depending on driving conditions. K&N also offers an air filter cleaning kit that cleanses and recharges the filter so that it can be reused. So this filter may be the last you will have to buy for as long as you own your car.

The filter media features multilayered cotton gauze treated with a special grade of filter oil. The oil makes the strands of the cotton very sticky. The air filter is shaped as a panel so that it can easily fit into the factory air box. To replace the dirty factory filter all you need to do is take it out of the air box and drop in the K&N 33-3044 air filter.

K&N is so sure of the quality of its air filters it backs them with a 10-year/Million Mile Limited Warranty®. The warranty promises that the air filter will perform for up to 10 years or 1,000,000 miles without requiring replacement.

The K&N 33-3044 replacement air filter is designed for the following vehicles:

2017 VOLKSWAGEN POLO 1.4L L4 Diesel Engine - All Models
2017 SKODA RAPID 1.4L L3 Diesel Engine - All Models
2017 SKODA FABIA 1.4L L4 Diesel Engine - All Models
2017 SEAT TOLEDO IV 1.4L L4 Diesel Engine - All Models
2017 SEAT IBIZA V 1.4L L4 Diesel Engine - All Models
2017 AUDI A1 1.4L L3 Diesel Engine - All Models
2016 VOLKSWAGEN POLO 1.4L L4 Diesel Engine - All Models
2016 SKODA RAPID 1.4L L3 Diesel Engine - All Models
2016 SKODA FABIA 1.4L L4 Diesel Engine - All Models
2016 SEAT TOLEDO IV 1.4L L4 Diesel Engine - All Models
2016 SEAT IBIZA V 1.4L L4 Diesel Engine - All Models
2016 AUDI A1 1.4L L3 Diesel Engine - All Models
2015 VOLKSWAGEN POLO 1.4L L4 Diesel Engine - All Models
2015 SKODA RAPID 1.4L L3 Diesel Engine - All Models
2015 SKODA FABIA 1.4L L4 Diesel Engine - All Models
2015 SEAT TOLEDO IV 1.4L L4 Diesel Engine - All Models
2015 SEAT IBIZA V 1.4L L4 Diesel Engine - All Models
2015 AUDI A1 1.4L L3 Diesel Engine - All Models
2014 VOLKSWAGEN POLO 1.4L L4 Diesel Engine - All Models
2014 AUDI A1 1.4L L3 Diesel Engine - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Daystar's Copper-Clad Bootlegger Features a K&N Filter to Protect the Supercharged LS3

Daystar's 1941 Power Wagon is powered by a 720hp Edelbrock crate engine.

Bootlegger made its public debut at the 2016 SEMA show in Las Vegas

With just 50 days of fabrication and assembly, Daystar turned an already burly 1941 Dodge Power Wagon into a beast of a machine capable of tackling just about any kind of terrain you could throw at it. Their “Bootlegger” Power Wagon proved its mettle with some serious wheeling in Tennessee’s backwoods during the Xtreme Off-Road Adventure before getting prettied up for its public debut at SEMA 2016. The off-road trip, lead by Ian Johnson from Xtreme 4x4, included 300 miles of wheeling and stops to tour three whiskey distilleries.

Daystar had the perfect vehicle to bring on the trip, it just needed some freshening up. Then the thought of wheeling through the Smoky Mountains sparked an idea for an off-road moonshine runner. Things suddenly got much more involved. With the help of products from Summit Racing and a slew of off-road and performance companies, including K&N, the Daystar team decided the project's new scope was within their grasp.

Starting with a complete but well-worn truck, the all-employee crew worked from the ground up to add off-road capability without losing any of the Power Wagon’s inherent style. That meant keeping the great lines whenever possible, upgrading the bits that were questionable, and flat-out replacing what was obsolete. Look closely and you’ll notice that the factory frame remains, although it has been boxed for strength. The beefed-up frame was disguised a bit when the new paint was given rust-colored accents at each weld to return a bit of its previous weathering. New Skyjacker leaf springs with Daystar bushings locate a Dana 60 front and GM 14-bolt rear axle that have both been filled with ARB lockers. They team up with a set of 42-inch Interco tires for go-anywhere traction. Wide-open fenders give the Wagon great approach and departure angles as well. Odds are it’s not getting stuck on the trail anytime soon, but in case a fellow off-roader needs a hand, a bumper-mounted Warn winch is ready for duty.

Of course any bootlegger worth their mash would have some excess copper sheet left over from building their still, so Daystar chose to incorporate several copper accents into their Power Wagon build. Copper can work harden, so it takes practice to form it without cracking. Luckily Daystar has plenty of experienced craftsmen on hand and finding some in-house talent was easy. The warm shine of the copper contrasts nicely with the olive drab paint and can be found in several details both outside the vehicle and inside the cab, most noticeably in the bed. The original bed, while intact, wasn’t much to look at. In its place went new copper bedsides and rails to match the small still in the bed along with a fresh floor from Bed Wood.

A GM 14-bolt rear axle uses a diff cover from G2.

A copper bed and hood sides were fabricated to give Bootlegger the shine of a moonshine still

There was no question that a rebuilt flathead six, as originally found in the WWII-era Dodge trucks, wouldn’t cut it on the trail, let alone the street. The weight of stout bumpers and recovery gear, along with tall tires, would have bogged it down. Considering that bootleggers were known for their hopped-up cars built to evade revenuers, something special was needed. They found what they were looking for, as propping open either of the louvered copper hood sides reveals a 416ci Edelbrock LS crate engine. Based on an LS3 block, the Edelbrock crate engine uses a 4-inch Manley crank to get more cubes and an E-Force supercharger to really turn up the torque. Output is an impressive 720hp and 695 lb-ft. and it’s all fed by a custom copper pipe air intake that uses a K&N filter element. A Hughes Performance 4L80E four-speed automatic transmission is bolted onto the stroker and sends power to a Magna transfer case and on to the axles.

While the utility of the Power Wagon remains, there were a few allowances made for creature comforts and style inside the cab. For example, there are copper accents riveted to the aluminum bomber-style bench seat and the cabin was thoroughly plastered with Dynamat for quieter cruising. Dakota digital gauges replace the utilitarian military gauges to keep tabs on the 700hp monster lurking just in front of the firewall.

Daystar’s 50-day build certainly paid off, as the Bootlegger survived not only its maiden voyage through the Tennessee mountains, over rocks, and across streams and mud, but also a frigid romp on an Alaskan glacier before its official unveiling at SEMA. People noticed too. Daystar’s booth was constantly thick with admirers, a tough feat to accomplish when every booth is vying for attention with exotic cars and flashy displays. Aside from the attention, Bootlegger also earned the Transamerican Auto Parts “Life is Better Off-Road” award for combining outstanding capability with style and build quality.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

3 Simple Ford F-150 Performance Upgrades

2015 Ford F-150
2015 Ford F-150

K&N has designed a range of high-performance filtration products that will help improve your Ford F-150's engine. From our synthetic-media air filters to our air intake kits, K&N can help you get more horsepower from your engine without special tools. Here are three options for upgrading your Ford F-150:

1. Install a K&N Air Intake System

Ford F-150 Air Intake
Ford F-150 Air Intake

Installing a K&N air intake system is the most effective upgrade to add to your Ford F-150. K&N air intakes replace the factory air box, and increase the amount of cold air that your engine has access to. This helps improve throttle response, with an air filter that features washable media.

K&N has designed air intakes for the many varieties of Ford F-150 and you can find the perfect fit for yours by visiting K&N’s Ford F-150 air intakes page. A K&N air induction system:

  • Replaces entire air box
  • Reduces air flow restriction so that your engine can take in more air
  • Air induction system includes a washable and reusable lifetime air filter
  • Can be installed with commonly available tools, usually in 90 minutes or less
  • Is designed to last up to 100,000 miles before service is required.
Ford F-150 Air Filter
Ford F-150 Air Filter
K&N Infographic - 3 Simple Ford F-150 Performance Upgrades
K&N Infographic - 3 Simple Ford F-150 Performance Upgrades

2. Replace Your Paper Air Filter with a K&N Performance Air Filter

Air filters keep dirt, harmful debris and other contaminants out of your engine. While most vehicles come with disposable paper air filters, K&N air filters are made with an oiled cotton material that is much less restrictive than a paper air filter. Visit the K&N Ford F-150 air filters page to find a K&N air filter made specifically for your Ford F-150. The benefits of a K&N air filter include:

  • Designed to Increase horsepower, torque, and acceleration
  • Better for the environment- reusable air filters means less disposable air filters filling up landfills
  • Washable and reusable- simply wash it and put it back into the air box
Ford F-150 Oil Filter
Ford F-150 Oil Filter

3. Upgrade Your Oil Filter to a K&N Oil Filter

Higher oil flow rates help your engine perform better and last longer. K&N offers Performance Silver and Performance Gold oil filters, both of which feature:

  • High Flow Rates
  • Anti-drainback valve (where applicable) keeps oil in the engine to help prevent dry starts
  • Exceptional filtration: block 99% of foreign material
  • Strength and Durability to prevent damage from rocks and debris
  • Rolled threads help prevent stripping and give a smoother installation

K&N Performance Gold® oil filters feature a 1" nut welded to the top of the canister, making them easy to remove when the time comes- simply wrench off with a standard tool. To find a K&N oil filter for your Ford F-150, visit K&N's Ford F-150 oil filters page.


Ford F-150 Cabin Air Filter
Ford F-150 Cabin Air Filter

K&N Cabin Air Filters are Also Available for Your Ford F150 Truck

K&N has designed a line of cabin air filters that will keep dust and debris from reaching the inside of your vehicle. Cabin air filters can help improve the interior air quality of your Ford F-150. Some benefits of a K& cabin air filter include:

  • Easy to Clean & Reuse
  • Cleans and Freshens Incoming Air
  • Helps Control Odors
  • 10 Year / 100,000 Mile Limited Warranty

To find a cabin air filter for your F-150, visit K&N's Ford F-150 cabin air filters page.


Find K&N Products For Your Vehicle

Find K&N products for the Ford F-150, as well as other vehicles, use the K&N application search below then use the K&N dealer search to find a K&N dealer in your part of the world.

 
K&N PRODUCT SEARCH K&N Filters Logo WHERE TO BUY K&N