Latest News

Yamaha’s Wolverine and Viking SxS UTVs Get More Air From the K&N YA-6914 Filter

The Yamaha Wolverine R-spec on the trail is one of the applications for the K&N YA-6914 filter

The Wolverine R-spec is one of the Yamaha SxS UTVs that will benefit from the added airflow

The Yamaha Viking SxS is powered by a torquey 686cc, liquid-cooled, fuel injected, SOHC engine. Its wild brother, the Wolverine, features a single cylinder, liquid-cooled, 708cc DOHC four-stroke with an innovative top end design that delivers solid performance. Both of these proven and reliable engines will benefit from the added airflow that the K&N YA-6914 direct-replacement filter delivers.

Whether you drive one of the recreational or ranch variations of the Wolverine or Viking, or the R-spec Wolverine which UTV Driver calls, “the best UTV Yamaha has ever produced,” you will feel the added throttle response that the YA-6914 is designed to deliver. That added power-producing airflow comes with K&N’s commitment to highly-effective filtration. Let’s take a look at both sides of this performance/protection equation.

Performance

The K&N YA-6914 is designed to provide increased horsepower and acceleration. The large surface area of pleated, cotton gauze filter media passes a greater volume of air to the Yamaha intake. That large intake is limited by the restrictive stock air filter, but the YA-6914 is designed to let the big single breathe.

K&N YA-6914 Air Filter product view for the Yamaha Wolverine and Viking SxS

The K&N YA-6914 filter fits perfectly in the Yamaha Wolverine and Viking air box

This potential power increase does not require fuel management modifications to the Wolverine or Viking. The YA-6914 is a true one-step performance upgrade that does not necessitate a laundry-list of other modifications and expense.

Protection

That same filter media that provides an increase in airflow features a large filtration area that offers a high dirt-holding capacity and long service intervals. K&N’s engineers designed the multiple layers of oiled, cotton gauze knowing full well that the filter would be subjected to extreme duty.

In K&N’s rigorous testing, the YA-6914 showed an estimated dirt holding capacity in excess 460 grams. That impressive number is complemented by an overall estimated filtration efficiency of over 98%.

To ensure a secure and airtight seal, the YA-6914 is designed with an application-specific sealing bead ensuring a precise fit. The filter installs perfectly in the stock Yamaha air box.

K&N YA-6914 Air Filter product view for the Yamaha Wolverine and Viking SxS

The YA-6914 features multiple pleats of oiled, cotton gauze filter media for airflow and protection

Convenience

Like all K&N filters, the YA-6914 is fully washable and reusable. It gets you back on the track or trail in a snap with a quick cleaning and re-oiling. The K&N 99-0621 washing fluid and the 99-0516 spray oil are all that are needed to complete this simple and straight-forward maintenance task.

Check the application list below for your Yamaha SxS, and consult the K&N online application search tool for all or your filtration needs.

2017 YAMAHA YXM700 VIKING VI EPS SE 686 - All Models
2017 YAMAHA YXM700 VIKING VI EPS RANCH EDITION 686 - All Models
2017 YAMAHA YXM700 VIKING VI EPS 686 - All Models
2017 YAMAHA YXM700 VIKING VI 686 - All Models
2017 YAMAHA YXM700 VIKING FI 4X4 W/SUNTOP 686 - All Models
2017 YAMAHA YXM700 VIKING FI 4X4 EPS W/SUNTOP 686 - All Models
2017 YAMAHA YXM700 VIKING FI 4X4 EPS SE 686 - All Models
2017 YAMAHA YXE70 WOLVERINE R-SPEC EPS SE 708 - All Models
2017 YAMAHA YXE70 WOLVERINE R-SPEC EPS 708 - All Models
2017 YAMAHA YXE70 WOLVERINE R-SPEC 708 - All Models
2017 YAMAHA YXE70 WOLVERINE EPS 708 - All Models
2017 YAMAHA YXE70 WOLVERINE 708 - All Models
2016 YAMAHA YXM700 VIKING VI EPS SE 686 - All Models
2016 YAMAHA YXM700 VIKING VI EPS RANCH EDITION 686 - All Models
2016 YAMAHA YXM700 VIKING VI EPS 686 - All Models
2016 YAMAHA YXM700 VIKING VI 686 - All Models
2016 YAMAHA YXM700 VIKING FI 4X4 W/SUNTOP 686 - All Models
2016 YAMAHA YXM700 VIKING FI 4X4 EPS W/SUNTOP 686 - All Models
2016 YAMAHA YXM700 VIKING FI 4X4 EPS SE 686 - All Models
2016 YAMAHA YXE70 WOLVERINE R-SPEC EPS SE 708 - All Models
2016 YAMAHA YXE70 WOLVERINE R-SPEC EPS 708 - All Models
2016 YAMAHA YXE70 WOLVERINE R-SPEC 708 - All Models
2016 YAMAHA YXE70 WOLVERINE 708 - All Models
2015 YAMAHA YXM700 VIKING VI EPS SE 686 - All Models
2015 YAMAHA YXM700 VIKING VI EPS 686 - All Models
2015 YAMAHA YXM700 VIKING VI 686 - All Models
2015 YAMAHA YXM700 VIKING FI 4X4 W/SUNTOP 686 - All Models
2015 YAMAHA YXM700 VIKING FI 4X4 EPS W/SUNTOP 686 - All Models
2015 YAMAHA YXM700 VIKING FI 4X4 EPS SE 686 - All Models
2015 YAMAHA YXM700 VIKING FI 4X4 EPS 686 - All Models
2015 YAMAHA YXM700 VIKING FI 4X4 686 - All Models
2014 YAMAHA YXM700 VIKING FI 4X4 W/SUNTOP 686 - All Models
2014 YAMAHA YXM700 VIKING FI 4X4 EPS W/SUNTOP 686 - All Models
2014 YAMAHA YXM700 VIKING FI 4X4 EPS SE 686 - All Models
2014 YAMAHA YXM700 VIKING FI 4X4 EPS 686 - All Models
2014 YAMAHA YXM700 VIKING FI 4X4 686 - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Goodguys Rod & Custom 2017 Southwest Nationals "Duel in the Desert at Westworld"

Photo of convertible at the Goodguys Rod & Customs Southwest Nationals2017

Just one of the beautiful cars at the Goodguys Rod & Custom Southwest Nationals 2017

The Goodguys Rod & Custom 20th Southwest Nationals held at Westworld in Scottsdale, Arizona, has been one of the biggest and best car shows in the country. But it seemed that this year’s attendance was off the charts. The coolest part of the big show has to be the autocross. For nearly ten years show goers, participants, and spectators alike, have been treated to the autocrossers grand finale, “Duel in the Desert”. Seriously, these are the finals we are talking about drawing racing biggest names like Al Unser Jr. and his cousin Robby Unser, along with the likes of the Leisinger Family, et al, of Summit Racing Equipment just to name a few.

Photo of custom cars on display at the 2017 Southwest Nationals

Goodguys Rod & Custom showcases over 3,000 incredible vehicles at the Southwest Nationals

Over the course of a typical show/race season, the “pro” autocrossers earn points based on their finish. The top points earners ultimately receive an invite to participate in the grand finale, Duel in the Desert. The shootout field starts with the Top 18 invites. An additional 14 spots allow for the opportunity for those who did not earn enough points for an invite to qualify or rather race their way into the event. Qualifying runs all day Friday until noon on Saturday. And the competition gets rather stiff. We are talking about the nation’s top autocrossers converging upon Scottsdale to see if they’ve got what it takes to compete for real cash and prizes, not just bragging rights.

Photo of the pit area at the Duel in the Desert in Scottsdale

Great shot of the pit at the 2017 Southwest Nationals Duel in the Desert

Let’s set the scene for this incredible event. We are talking about over 3,000 rods, customs, classics, muscle cars, and trucks through 1972. The “Top 12” cars and trucks of the year presented by Meguiar’s are on display. Along with the Duel in the Desert Autocross Finals Shootout, any participant can try their hand at the K&N filters All American Sunday, welcoming American made or powered vehicles of all years! And if you need even more horsepower you can head over to Nitro Thunderfest Dragster Exhibition. There are literally hundreds of vendors and manufacturers exhibits, a swap meet, the Cars 4 Sale Corral, and so much more. But let’s get back to the shootout!

A photo of the Saturday afternoon shootout board with racer pairing.

A glimpse into the Saturday afternoon shootout pairing.

K&N had several race team drivers on hand to compete for the win. The coolest by far though had to be seeing Mike Maier competing in Mike and Ingrid Ansell’s bad ass big block 1972 Corvette with the MMI designed and tuned suspension. The Ansell’s have owned this beautiful C3 since the mid-90s and have been regularly competing at events in Northern California since their purchase. After seeing, competing with, and having spent time with Maier at some local events, Ansell approached Maier to discuss improving the suspension and handling on he and his wife’s Vette.

Photo of Jane Thurmond in her C2 as she comes off the autocross course

Jane Thurmond in her 1964 Chevrolet Corvette as she comes off the autocross course

In fact, Mike Ansell wanted to work alongside Mike Maier to create the perfect setup. He was ready to do the work. And that’s just what he did. Together, the two Mikes sought out those competitors who’d been instrumental in performance car set-up in the Trans Am series, along with folks who had seen great success at the local level. To that, Mike Maier implemented his years of suspension and race experience along with a little MMI flavor to come up with the suspension we see today in that beautiful burgundy C3, what Mike Maier refers to as the “every man” or “any man’s” car. That car that came from the dealer forty years ago that still has some of the sexiest body lines and is perhaps one of the best platforms for an incredible pro-touring or autocross car.

Photo of Mike Maier, Mike & Ingrid Ansell in the pits discussing race strategy.

Great minds think alike. Mike Maier discussing strategy with Mike & Ingrid Ansell.

Earlier in the year Mike Maier qualified in the Ansell’s Corvette and received an invite to the Southwest Finals for the greatly anticipated Duel in the Desert Shootout where he would compete against folks like Brian Hobaugh, Bret Voelkel, Greg Thurmond, Al Unser Jr., Josh Leisinger, and Robby Unser to name just a few. As his weekend progressed he was able to get a great feel for the competition and the course. And let’s talk about the course! Really it felt like four drag races with a couple of showcase turns and some minor wiggles between. It was fast and fun and the weather was quite ideal with the exception of a minor rain delay on Friday. But that didn’t dampen the spirits of our competitors.

Photo of Robby Unser in the Speedway Motors purpose built '68 Camaro on track

The legendary Robby Unser on course in the Speedway Motor purpose built 1968 Camaro

On the flip side, our K&N team driver, Jane Thurmond, had to actually race her way in to qualify to compete in the shootout. There were 14 spots and she held the field on Friday maintaining a Top 5 spot securing her place in the shootout field. Saturday morning brought some fresh eyes and faster times among those hoping to qualify. The wind had picked up slightly, the skies were no longer overcast and the track played a little different on Saturday for our racers. Jane consistently laid down competitive lap times but couldn’t break past the 41 second mark going into the shootout. At noon Saturday, if you were hoping to have made the cut you’d have better done everything you could because qualifying was over and the field was set.

Shot of Robby Unser out on the autocross track doing donuts after hearing that he won the shootout!

Robby Unser and the Speedway Motors purpose built 1968 Camaro tearing up the course after the win

Our team drivers made it. Maier by invite and Thurmond by qualifying. The real pressure would begin come one o’clock on Saturday afternoon. A quick drivers meeting and the reveal of just who would race who. In the third round, Jane was paired with 12-time SCCA Champion, race mentor, and friend Mary Pozzi. After a fast and clean run by Thurmond, Pozzi came out for the win by laying down a faster run and would move on to the second round of the shootout where she would subsequently be inched out by Detroit Speeds, Ryan Matthews.

Photo of Wes Drelleshak in his '59 Chevy Apache out on the autocross course

Wes Drelleshak and his 1959 Chevy Apache tearing up the autocross track

Mike Maier, with a fastest qualifying lap time of 40.709, would be paired with fellow NorCal racer and friend Mike Erickson who laid down a lap time of 41.888 and would give up the win allowing Maier to move on within the shootout. In the second round, Mike Maier would go on to beat Jason Tanner from Speedway Motors, who didn’t let up one bit. In the semi-finals, Mike would beat Josh Leisinger by a mere 3/10th’s of a second and left the crowd in the grandstands and pit area cheering. As other racers fell away from the shootout, only two competitors were left, Mike Maier and Robby Unser competing in his 1968 purpose built Speedway Motors Chevrolet Camaro. And Maier in the 1972 Chevrolet Corvette owned by Ingrid and Mike Ansell, the “every man” car with the 20-year-old big block motor. To have made it to the finals in and of itself was an achievement. But it was time to go racing.

Mike Maier, Mike & Ingrid Ansell with check in hand in front of their '72 Corvette.

Mike Maier, Mike and Ingrid Ansell and their 1972 Corvette, alongside their Goodguys purse!

Maier would run first and lay down an incredible lap time of 40.5 seconds, however, he nicked a cone and that left the door wide open for Unser to come in laying down a fast, clean run and walk away with the win. But Robby didn’t just play it safe. He had been on fire throughout the shootout and was the only competitor to run clean in the 39s. In true Unser fashion, he didn’t disappoint and brought home another high 39-second lap, clean. Upon being informed of his win, he turned that Camaro loose on the course and treated the crowd to the smokiest donut show and the crowd went wild. What a great way to end the day.

Photo of Eric Sheely and his Ford Focus RS, winner of All American Sunday

Eric Sheely in his 2017 Ford Focus RS after the win on K&N filters All American Sunday

Sunday saw the K&N filters All American Sunday with a field of forty enthusiasts and die-hard autocrossers getting out on track and laying down their fastest lap times. We had a chance to see old muscle and new and everything in between. Eric Sheely in his 2017 Ford Focus RS came away with the fastest lap of the day with a time of 41.646. Truly a fantastic day for Eric and the Sheely posse.

K&N Engineering is proud to be a part of the Goodguys Rod & Custom shows and very proud to be a part of this community. We would like to congratulate our drivers and the winners of the 2017 Southwest Nationals.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N-sponsored Greg Adler of Team 4 Wheel Parts Climbs the Podium in the Baja 1000

Adler and Team 4 Wheel Parts at the checkered flag of the Baja 1000

Adler secured a spot on the podium with a team effort from Team 4 Wheel Parts

It’s the stuff of legend. The Baja 1000 is arguably the most iconic event in the dusty world of cross-country desert racing. The venerable endurance race celebrated its 50th year as the signature event in the sport in 2017 and K&N-sponsored Greg Adler made the most of the anniversary.

The 3rd place finish in the Baja 1000 capped off a stellar racing year for Adler and Team 4 Wheel Parts. The team competed in the King of the Hammers and secured a class victory in another legendary desert race, the Mint 400.

Adler’s race to the podium was not without its mechanical setbacks. His tried, tested, and typically reliable Ultra4 Brian Kirby-built truck was sidelined for a total of four and a half hours for repairs throughout the race. However, the first section of the race was relatively trouble free.

Adler and Team 4 Wheel Parts racing in the Baja 1000

That K&N decal shows Adler's truck is fitted with best in performance and protection

"We were running hard for the first 200 miles or so with our only major challenge being a starter issue that held us up for about a half hour at our scheduled stop in San Felipe and then we were off again," said Adler.

The brutal Baja terrain has a way of derailing race plans and mangling the best designed machines. Adler’s number 10 truck was no exception, as it suffered the ravages of the Baja Peninsula in the next section.

"As the sun was setting and the dust hanging in the air, attrition was starting to take its toll on the entire field,” Adler said. “By the time we got to our fourth scheduled pit stop, we were in pretty rough shape. We had lost a control arm, the transfer case was shot and we broke a CV. That's when the team really came together and they were determined to get us up and running - whatever it took!"

Adler and Team 4 Wheel Parts in the pits of the Baja 1000

Adler is quick to sing the praises of the crew that kept the Team 4 Wheel Parts truck rolling

With the truck back in the race thanks to the tireless and skilled work of the Team 4 Wheel Parts mechanics, the racing team of Adler and his fellow drivers, Brian Kirby and Jason Scherer were back in the hunt.

"Kirby built the car and knows it inside and out," said Adler. "With his co-driver, Dylan Cochran, navigating for him from the right seat and then handing the car off to King of the Hammers champion, Jason Scherer and his co-driver Adam McGough, we knew we were in good hands all the way to the finish line."

When the Team 4 Wheel Parts truck crossed the finish line, the team had logged 1,134.4 miles over 31 hours of brutal racing. Just finishing the Baja 1000 is a notable feat. Stepping onto the podium is a monumental accomplishment and a defining moment in any racer's career.

Adler and Team 4 Wheel Parts before the Baja 1000

Adler on the Baja 1000 big screen before the race

"It was an incredible feeling to be standing at the finish in La Paz with my family including my brother, Kevin, who managed the logistics and planning throughout this monumental effort, along with the team who had worked tirelessly to get us there," said Adler.

Adler could not help but reflect on a year that he will surely remember a highlight of his career.

"Earlier in the year, we completed the King of the Hammers, took the class win at the Mint 400 and now have collected a podium spot in the 50th running of the Baja 1000," Adler said. "It doesn't get much better than that!"

K&N congratulates Greg Adler and Team 4 Wheel Parts on a well-earned podium in the Baja 1000. We look forward to continuing to provide the team with the best in filter technology in 2018.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Mark Shell of Bonneville Customs Wins the K&N Award at the Long Beach IMS

Mark Shell's Cherry Bomb custom chopper side view at the Long Beach IMS

Mark Shell's Cherry Bomb custom sits long and low at the Long Beach IMS

Mark Shell, the owner of Bonneville Customs, has the distinction of winning the first K&N builder’s award of the new season of the Progressive International Motorcycle Show (IMS). The Idaho Falls-based builder took the prize at the Long Beach, California, stop of the biggest traveling motorcycle show in the nation.

Shell’s 2015 Harley-Davidson custom is more than worthy of the prestigious specialty award given to one talented builder by K&N. This is the second straight year in which K&N will be a vital part of the J&P Ultimate Builder Custom Bike Show at each stop of the IMS.

“This bike was completely handmade,” said Shell. “Every part, down to the brass washers.” With that remarkable fact in mind, here is a closer look at Bonneville Custom’s awesome chopper aptly named Cherry Bomb.

Mark Shell's Cherry Bomb custom chopper engine view at the Long Beach IMS

A mix of metals on the engine and bodywork make the custom chopper gleam

Engine and Drive

Shell’s chopper is built around a 96 inch Harley-Davidson Shovel V-twin that breathes through twin velocity stacks and features a full stainless exhaust. That engine powers through a six-speed transmission with a hand shift and a hand clutch. It spins a 2-inch open primary and there is a chain final drive spinning the rear wheel.

The artful bends of the fluid supply lines deserve special mention. While visually intricate, this is one of the cleanest powerplants you will see.

Frame and Wheels

The stretched and raked goose-neck frame is a hardtail out back and displays a custom springer front end. The spoked front and rear wheels carry disk brakes that are both actuated from floor controls. The retro rubber spooned on the rims fits the motif perfectly.

Mark Shell's Cherry Bomb custom chopper rear view at the Long Beach IMS

The Bonneville Customs chopper is fully hand-built down to the smallest detail

The low, drag handlebars and forward foot controls make for a stretched out aggressive riding position.

Bodywork

The candy red paint, artfully applied by Creative Auto to the minimalist but perfectly crafted tank and fender, give Cherry Bomb her name. Nickel plated, aluminum, and brass parts abound on the build. The brass and stainless steel laminated seat may be low on comfort, but it is certainly high on style.

K&N is proud to be a sponsor of the 2017-2018 J&P Ultimate Builder Custom Bike Show as the Progressive International Motorcycle Show makes its way across the country. Mark Shell’s Cherry Bomb build has set the bar very high for other builders looking to claim the coveted K&N prize.

K&N display at the at the Long Beach, California Progressive International Motorcycle Show

After checking out the customs at each stop of the IMS, stop by the K&N display to see what's new

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Bradley Morris Races in all Four Pro Classes at Lucas Oil Off Road Season Finale

K&N sponsored driver Bradley Morris races in all four Pro classes in the same weekend

K&N sponsored driver Bradley Morris races in all four Pro classes in the same weekend

Arizona turned out to be a weekend of non-stop racing for Bradley Morris and the BME Motorsports team. Bradley was going to be competing in all four pro classes at the Lucas Oil Off Road Racing Series at Wild Horse Pass in Chandler, Arizona. It is the final rounds of the 2017 season and Bradley wanted to make history and be the first person to do this. This would consist of racing his Pro 4 and Pro 2 like usual but adding the two classes of Prolite and Pro Buggy. He wouldn’t race in the points race in these two classes, allowing him to focus on his main classes where he is battling for Pro 2 Rookie of the Year. He would be racing these additional two classes in the final races which are the Challenge Cups and they are non-point races.

Bradley Morris practicing in his K&N sponsored Prolite for the Challenge Cup

Bradley Morris practicing in his K&N sponsored Prolite for the Challenge Cup

The weekend started with practice where Bradley drove all the vehicles to get practice and additional seat time. All of the classes go one after another, so Bradley had to drive one truck and then hop out and rush over to the next truck to get buckled in. The officials would hold all the trucks in the class till Bradley was safely in the truck, and at the moment he was good they would start to head out on to the track for the next practice. There were three sessions of practice for every class with only a small break in between, creating an extremely exhausting day of driving and adjusting the trucks for the team.

Flying through the air in front of the huge crowd while leading the Pro4 race

Flying through the air in front of the huge crowd while leading the Pro4 race

In the final points race in the Pro 4, Bradley would start in the middle of the field. Bradley got a clean start and would start battling his way towards the front. He was able to get to the front and take the lead around the fourth lap, and after a caution, he would have Kyle LeDuc right behind him. Bradley was able to stay in front of Kyle but also put a gap between them when Bradley would get a flat from some previous contact with someone hitting him in the rear bedside, gouging the tire. Bradley was able to go to the hot pit and get it fixed but lost the lead and a lap. He was able to get back out on track just to get another flat when landing sideways off of the large jump and knocking the tire off of the wheel.

Bradley Morris racing his Pro2 to a strong finish, awarding him with 2017 Rookie of the Year in Pro2

Bradley Morris racing his Pro2 to a strong finish, awarding him with 2017 Rookie of the Year in Pro2

The Pro 2 race was action packed with Bradley starting towards the rear. This race was very important because Bradley was battling Jerett Brooks for Rookie of the Year, and Jerett was ahead by five points. The race started with the two of them battling for several laps until Bradley was able to break away and start working his way forward. Bradley would start to battle with Jeremy McGrath for most of the race, but Bradley kept moving forward, passing Jeremy and then putting a large gap between the two of them. Bradley was in fourth place and knew he had to do his best to try and catch third and stay as far ahead of Jerett as he could. With the laps getting close to the end, Bradley was able to catch up to third place but ran out of laps before he could make a pass. Fourth place finish was good enough to pass Jerett in the points by one point, earning himself the “2017 Pro 2 Rookie of the Year” award and fifth place in the points.

K&N backed driver Bradley Morris racing hard during the 2017 Prolite Challenge Cup

K&N backed driver Bradley Morris racing hard during the 2017 Prolite Challenge Cup

The last races of the year are the Challenge Cups, and there is one for Pro Buggy’s, Prolites, and a Pro2 vs Pro4. Bradley raced in all three races using his old Prolite and his old Pro Buggy that the new owner allowed him to drive. The first race was the Prolites that had almost twenty trucks in the race. Bradley qualified around the middle, giving him a great shot to get to the front. There was a large prize fund for these races, making everyone charge harder than they really should be. In the beginning of the race, Bradley would battle trying to get to the front when a truck behind him slammed into the side of him entering the turn taking him out and popping his rear tire. The team got it fixed and got him back out on the track allowing him to continue but a lap down. This wasn’t the way he wanted to start the day.

Leading the race Bradley Morris suffers a flat tire while sliding through the turn

Leading the race Bradley Morris suffers a flat tire while sliding through the turn

Next was the Pro Buggy, and this race went even worse than the Prolite for Bradley and the BME team. The race started and Bradley had a great start coming from the rear. He was able to pass several people and get almost to the lead with some cars tangling on the first lap. The officials stopped the race and wanted a complete restart since they didn’t get a full lap in. On this restart, Bradley was not that lucky, and going into turn one Bradley was on the inside when the car on the outside over rotated in front of him coming down and clipping Bradley’s front suspension damaging it to end the race for Bradley.

Bradley Morris battling his way through the Pro2 traffic while leading the Pro4 in the Challenge Cup

Bradley Morris battling his way through the Pro2 traffic while leading the Pro4 in the Challenge Cup

For the final race of the Pro 2 vs Pro 4, Bradley had a hard decision to make. After qualifying and the inversion, Bradley would be on the pole for both the Pro 2 and Pro 4. The team debated back and forth about what truck he should drive. The final decision was for him to race the Pro 4 because if a caution came out after four laps the advantage that the Pro 2’s had would be gone. With the start of the race, Bradley would lead the Pro 4 trucks and try to close the gap between them and the Pro 2s. Bradley would hold the lead and battle with Kyle LeDuc and RJ Anderson up to the fifth lap when the caution came out because of the Pro 2s, so it was a great decision to drive the Pro 4. With the green flag waving, they were all bunched up and now in traffic with the Pro 2s who didn’t want to get passed. The Pro 2s were not giving up and started slamming into the faster Pro 4s when they came through. Bradley would end up getting hit in turn two and up on two wheels while two other Pro 2s were on two wheels. Then in the next turn, those trucks would drive hard into the turn on the inside knowing they couldn’t stop and would use the trucks as a cushion, and unfortunately Bradley was the one they plowed into, breaking his suspension and ending his day.

All of Bradley Morris's K&N Filters sponsored trucks ready to do battle in Arizona

All of Bradley Morris's K&N Filters sponsored trucks ready to do battle in Arizona

Bradley said, “Being able to race all four Pro classes on the same weekend was challenging, it was mentally and physically exhausting. Before each time out on the track I had to remind myself which car I was in and what driving style was needed for that vehicle. It is always fun to do something that hasn’t been done before and if it has it is very uncommon. I was able to race in all Challenge Cups in the same day before when I first started getting into Pro 4 with Curt LeDuc a few years back, but now being able to do all four classes in a weekend is another accomplishment. I want to thank my team for working so hard to make it possible for me to race all four, I know it wasn’t easy for them.”

Not the way the Bradley and the team wanted the weekend to go, but also a good weekend with Bradley being very fast and able to show people the front is where he is comfortable. So watch for the 2018 season to be fast and consistently battling for the lead.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N