Latest News

New Intake for 2017-2018 Honda Civic Type R: Guaranteed to Increase Horsepower

Engineered specifically to fit the engine bay of 2017-2018 Honda Civic Type R models, the K&N® 69-1505TWR air intake system provides a guaranteed increase in horsepower and torque (an estimated 12.6 horsepower from dynamometer testing). The 69-1505TWR system features a washable, reusable High-Flow Air Filter™, a low-restriction aluminum intake tube, and a custom steel heat shield. The unique heat shield design incorporates the vehicle’s hood in order to simulate a closed air box—keeping your engine air cooler, and giving you an increase in performance!

The 2018 Honda Civic Type R

The 2018 Honda Civic Type R

K&N PERFORMANCE AIR INTAKE SYSTEMS BOOST HORSEPOWER

If you want to give your Type R top-quality engine protection and a guaranteed increase in horsepower, check out the 69-1505TWR performance air intake system—specifically designed to fit in the engine bay of 2017-2018 Honda Type Rs. A low-restriction tube allows airflow to move through the system efficiently, and helps prevent turbulent air (and heat). An innovative heat shield design helps provide outstanding protection against high temperatures. Giving your engine a higher volume of cooler air an increase its combustion efficiency, which translates to greater horsepower for your vehicle!

The 69-1505TWR performance air intake system

A unique heat shield design helps protect against high temperatures

HIGH-FLOW AIR FILTER™ DESIGNED FOR OUTSTANDING PROTECTION

Most factory disposable paper filters only “surface load” contaminants—collecting them on the surface of the media, which over time can reduce the filter’s efficiency due to clogging. Alternatively, High-Flow Air Filters™ “depth load” contaminants; multiple layers of cotton fibers capture particles on many levels. Because the contaminants are incorporated into the filter fibers, the filter can still operate without significantly reducing its performance.

The High-Flow Air Filter™ included in the 69-1505TWR intake kit is oversized with a conical shape, providing a greater surface area and allowing for a service interval of up to 100,000 miles between cleanings (under normal highway driving conditions). High-Flow Air Filters feature an oiled, layered design. When your filter does need to be cleaned, you can use the K&N Recharger® Kit (99-5000 or 99-5050) to quickly and easily restore your filter’s performance. Each K&N intake (and filter!) is designed to last for the life of your vehicle.

INSTALLATION

The 69-1505TWR performance air intake system

An aerodynamic intake tube helps increase airflow

The K&N 69-1505TWR intake system is engineered to incorporate factory mounting points and the factory mass air sensor. Installation can typically be completed in 90 minutes or less, and requires only simple hand tools. Detailed instructions are included in your kit, and installation videos for many vehicles are available on the K&N website.

Engineered to fit:

2018 Honda Civic Type R 2.0L L4 Fuel Injection: All Models

2017 Honda Civic Type R 2.0L L4 Fuel Injection: All Models

The 69-1505TWR after installation

The 69-1505TWR after installation

WARRANTY

Each intake system comes with a 10-Year/Million Mile Limited Warranty. Furthermore, using a K&N replacement air intake system will not void your factory warranty; in the U.S., manufacturers must provide evidence that an aftermarket part is the cause of a necessary repair in order to void or deny warranty coverage. The Consumer Products Warranty Act of 1975 (also known as the Magnuson-Moss Warranty Act) protects consumers’ rights to their warranty coverage.

DYNAMOMETER RESULTS

When buying a K&N performance air intake system, you’re protected by the guarantee that you’ll gain horsepower and torque after installation!

During dynamometer testing, a 2017 Honda Civic Type R with a factory air intake system was recorded at 292.4-hp at 6,122 RPM. After installation of 69-1505TWR, the same vehicle was recorded at 305.0-hp at 6,122 RPM—an estimated increase of 12.6-horsepower. The torque also increased from 254.6 lb.-ft. to 274.0 lb.-ft.—an estimated increase of 19.4 lb.-ft. at 3,731 RPM.

Visit this page to purchase the 69-1505TWR air intake system, or visit this link to explore other performance product options for your vehicle. Join the millions of customers who trust K&N to help them boost performance and protection in their vehicles!

 

 

What to Look for When Buying a Used Car

A comprehensive guide to evaluating prospective purchases

VEHICLES TO AVOID

Law enforcement vehicles, fleet cars, rental vehicles, taxis, or vehicles that have been used for ride-share services: these should all be at the very bottom of your purchase list. Even if they appear to be in pretty good shape, they’ve most likely racked up an excessive amount of mileage—and were almost certainly operated under fairly harsh driving conditions.

Lemons: vehicles that have warranty-covered defects which cannot be repaired by the manufacturer within a certain time period, and after several attempts, are considered lemons in most states (though the requirements vary). Depending on location, if a manufacturer re-purchases a defective vehicle, the title must reflect that it is a lemon law buyback. Purchasing these cars is generally not advisable, since the manufacturer will have already made several attempts to rectify the problem before re-purchasing it from the owner.

Salvaged: salvaged vehicles have been damaged to the degree that the insurance company, leasing company, or owner has decided it isn’t worth the cost of repairs. If the damage is very minimal (which is unlikely, considering that the car is most likely worth less than the cost of repairing it), you could consider purchasing—but keep in mind that if the car has been in an accident, it could have sustained more serious damage than meets the eye (which leads us into the next category)—

Wrecked and repaired: if a car has been in a wreck, it may have sustained frame damage that could cause instability and issues in the future. If you’re interested in purchasing a vehicle that has been involved in a wreck, be sure to request the repair invoices/records to see what type of work has been completed.

Storm registry: some vehicles that have sustained flood damage are moved great distances in order to be sold in other areas where buyers might not be as well-versed in inspecting for water damage. The National Motor Vehicle Title Information System (NMVTIS) can help you research the background of your prospective new vehicle to make sure that the title isn’t missing any important information (but it’s still important to check for signs of water damage even if the title comes up clear).

Man holding money

You’re ready to lay down some hard-earned cash—so take the time to evaluate your purchase.

Potentially stolen: if you have any suspicions that the used vehicle you’re interested in may have been stolen (some clues include if the VIN plate is missing/repainted, the VIN on the title doesn’t agree with the one on the body, or the vehicle is priced lower than its value), it’s best to just walk away.

EVALUATING THE EXTERIOR

Arriving with a checklist can let prospective sellers know that you’re serious about fully evaluating the vehicle—and can help you reduce the buying price if you locate areas that need repair.

• Take a 360° view of the car

Circle the car and try to look from every angle. Are there any ripples in the body that might indicate damage? Is the paintjob in good shape? Look carefully along the body at an angle—instead of straight on—to see if you can catch any dings or paint cover-ups in the reflection.

• Look for dents and paint abnormalities

Car with severe corrosion

Corrosion is serious—and it will only get worse.

Severe dents and chipped paint can be expensive repairs. If the seller hasn’t already discounted the price to account for the damage, make sure the proper deductions are made. If you notice areas that have been re-painted, it should tip you off that the vehicle may have been in an accident.

• Keep a sharp eye out for rust

Rust spreads—which is why it should always be immediately removed/repaired when noticed. Even if it is painted over, which some unscrupulous sellers will do, the surface beneath will continue to degrade. Don’t forget to look for rust on the underside of the car, in the wheel wells, and under the trunk mats. If you observe anything other than very mild rusting, it’s best to walk away.

• Check for salt corrosion on the undercarriage

Salted roads can accelerate corrosion on the undercarriage of a vehicle, so bring a flashlight and make sure to get down on your hands and knees. If the vehicle has a brand-new undercoating, that may be a red flag that the seller is trying to hide corrosion.

• Look for signs of a bent frame

Spot welds and bent frames are signs of wreck repairs, and should be an immediate deal-breaker if not already disclosed by the seller.

• Check to make sure the doors, hood, and trunk all latch firmly

If a vehicle has been in an accident, door latches, hood latches, and trunk latches may be thrown out of alignment. This is also a good time to check the insides of doors and in the trunk for signs of repainting.

• Watch for sagging

Truck driving through water

Always look for signs of water damage in any prospective used vehicle.

The front and rear of the vehicle should be level when resting on a flat surface. If you see unevenness either front-to-back or left-to-right, it could be an indication that the suspension is damaged.

• Look for tell-tale signs of water damage

If a car has been flooded out, you will typically be able to find water stains inside the trunk, under the seats, and under carpeting—and the car may have a musty smell.

• Check for leaks

Move the vehicle from where it was parked, and check to see if there are any fresh leak spots.

• Inspect the tires

Tires should all be the same size and type; unmatched/unbalanced tires can negatively affect gas mileage and potentially cause premature wear. Look carefully at the treads—wear on the outside treads can indicate an alignment issue. Correcting front-end alignment is usually relatively inexpensive, but rear-end alignment issues could indicate a bent rear axle, which is an expensive repair.

Clean vehicle interior

Make sure the condition of the interior approximately matches the number on the odometer.

EVALUATING THE INTERIOR

• Take a look at the carpet and upholstery

A pristine interior may or may not be important to you, but evaluate whether or not the interior wear matches up with the mileage number you’ve been given. If the steering wheel or other interior components are extremely worn, the odometer shouldn’t read at only 30,000 miles.

• Try all of the seat belts

Make sure you can find all of the back-seat belts, and that they are all operational.

• Look for airbag powder

Child buckling seat belt

Check all of the seat belts to make sure they’re operational.

If the vehicle has been in an accident that caused the airbags to deploy, you may be able to see trace residue of the airbag powder inside the interior. Check in places that are more difficult to clean—like under and between seats, under floormats, and around the steering column.

• Try all the door locks and window controls

Repairing these will require you to disassemble the door, which can be time consuming and potentially expensive.

• Check the odometer

If the number seems too good to be true, it probably is. It’s possible to tamper with odometers, which is why it’s critically important to examine all of a car’s official records (and service providers often note the mileage on invoices, assuming you are given previous service records to peruse).

• Check all the lights (with help from a friend)

Have someone stand outside the vehicle and see if the headlights, front and rear signals, fog lights, and high beams are all operational. This is also a good time to have a friend check to see if any smoke comes from the tailpipe while the engine is running.

• Check windshield wipers, the sound system, the heater, A/C and heat, and interior lights

Mechanic beneath vehicle

It’s never a bad idea to have a trusted mechanic evaluate your prospective purchase.

Give all the controls a go, just to make sure you don’t have any surprises once the weather changes.

UNDER THE HOOD

• Take a look at the radiator and hoses

Cracked and brittle hoses indicate the need for replacement.

• Check the radiator fluid level/color

The fluid should be near the full line. If it’s clear, it is likely water—which is not a good sign that the car has been properly maintained. If you see oil floating on the surface of the fluid, a cylinder has likely cracked, and you’ll likely want to walk away from the purchase.

• Check the wiring

Can you see anything loose, cracked, or frayed?

• Check the fan belts

Frayed, cracked, or brittle belts should be replaced.

• Check the spark plug cables

Complementary vehicle evaluation checklist

Print this complementary vehicle evaluation checklist

This isn’t an extremely expensive repair, but cracked or brittle spark plug wires can potentially cause the engine to misfire.

• Inspect the battery

Corroded terminals indicate the need for a new battery. The seller may attempt to clean the battery before a sale, so check the battery cables too.

• Ask when the oil filters, air filters, and fuel filters were last replaced

Records of regular maintenance are a definite plus. If the car has a stock air filter, consider switching it out for a K&N High-Flow Air Filter™, which is washable, reusable, and designed to last for the lifespan of your vehicle.

ROUND-UP

Before purchasing any used vehicle, it’s important to do a thorough inspection—and if possible, hire a trusted mechanic to do the inspection with you. Make sure to do a test drive (with the windows rolled down, and also up!) and listen for any strange noises or rattles. Check the brakes for screeching, and note whether the transmission moves smoothly between gears. If you do end up purchasing a used vehicle, make sure to invest in any necessary maintenance. We recommend immediately replacing your disposable air filter with a K&N® High-Flow Air Filter™, which provides your vehicle with exceptional engine protection and airflow. Feel free to print the complementary vehicle inspection checklist included above to help with your next used car purchase.

Explore all of the products that K&N® has for your vehicle here, and join the millions of vehicle enthusiasts who trust K&N® to provide performance, protection, longevity, and clean air!

 

 

K&N’s Chief Engineering Officer Steve Williams Wins Super Comp World Championship

Steve’s dragster

Steve’s dragster features many K&N products which he has been instrumental in developing

Steve Williams, K&N’s Chief Engineering Officer, achieved yet another racing milestone this past Sunday—the title of 2018 NHRA Lucas Oil Drag Racing Series Super Comp World Champion. A first-place finish in Sonoma, Calif., combined with final-round showings in Dallas and Las Vegas, allowed Williams to amass the points needed to clinch the World Championship title.

Williams has collected many notable wins in his personal racing career, including four NHRA Division 7 championship titles and over forty “Wally” trophies. In 2014, he claimed the NHRA Division 7 Super Gas Championship, followed by a third-place finish in the Super Comp national rankings in 2016. This past weekend’s championship win has been 27 years in the making. “It’s very tough to come out of Division 7 and win the World Championship, because you’re up against almost 1,800 people across the United States,” Williams said. “I’ve been close more times than I care to admit. I was finally able to check this off the bucket list.”

Williams burning rubber

Williams has spent over 20 years in service at K&N

Steve has developed a reputation as a strong competitor in his many years of racing. “The coolest part was that all of the competitors I’ve raced with for twenty years were in the stands—and after my wife and daughter hugged me, they each came down one by one to say congratulations,” he added.

“It speaks volumes that Steve’s competitors were the first to come down and shake his hand,” said K&N CEO Tom McGann. “Winning a world championship in any sport is a tremendous honor, and nobody deserves it more than he does.”

ROAD TO THE CHAMPIONSHIP

Division 7 3rd Round Fontana, CA 5-20-18
Division 7 Win Sonoma, CA 7-22-18
National Runner-up Seattle, WA 8-5-18
Division 7 4th Round Salt Lake City, UT 8-26-18
Division 7 5th Round Great Bend, KS 9-29-18
National Runner-up Dallas, TX 10-7-18
National 4th Round Las Vegas, NV 10-28-18
Division 7 Semi finals Las Vegas, NV 11-4-18

Steve posing with his trophy after a win in Sonoma, Calif., on July 22

Steve posing with his trophy after a win in Sonoma, Calif., on July 22

As the head of research and development at K&N, Williams has been instrumental in the development of K&N racing products for over two decades, and continues to contribute his knowledge to the development of innovative products for consumers. K&N wants to formally congratulate Williams, whose dedication to excellence has reaped a well-deserved championship win, and brought invaluable expertise to the K&N research and development team.

The SEMA Scoop: All the New K&N Products (Plus a 1969 Chevy Build for SEMA 2019!)

There are few events more thrilling in the automotive industry than SEMA, one of the most elite and exclusive automotive trade events in the world. For a few days each fall, the brightest, most innovative minds in the industry—and all the most exciting new products—converge at the Las Vegas Convention Center for product demonstrations, unique events, and opportunities to network. The 2017 event saw more than 70,000 attendees, with over 3,000 newly introduced products, and the 2018 event has proven itself to be equally exhilarating.

1969 Chevrolet suburban

This 1969 Chevrolet suburban will be fully restored for SEMA 2019—and you can help choose the build!

K&N has been featuring several new products at this year’s show, including the ECI system (electronic carburetor injection), and the soon-to-be-available Boost Control Module and Throttle Control Module. In addition, the K&N booth included a custom-built Yamaha RD400, a 1969 Chevrolet suburban (which will be fully rebuilt for the 2019 show!), and a 2019 Chevrolet Silverado with a custom prototype intake system.

NEW K&N PRODUCTS FEATURED AT THE SHOW

ECI

The K&N ECI is a bolt-on system which adds a supplemental fuel source to improve engine performance. Comprised of a spacer plate with a fuel block and injector, an electronic control unit (ECU), and wide-band oxygen sensor, installation can typically be completed in a matter of hours. Better yet—after setting five simple parameters, the system can tune itself. After installing your new ECI system, hiccups on cold starts can be a relic of the past.

The ECI available for Holley 4150s, Holley Dominators, and Quadrajet-style carburetors

The ECI system is available for Holley 4150s, Holley Dominators, and Quadrajet-style carburetors

THROTTLE CONTROL MODULE

The K&N Throttle Control Module processes input data from the gas pedal and bypasses the factory signal to the vehicle’s ECU, sending a modified signal directly to the throttle body—creating an increase in throttle responsiveness that will make your car feel like a whole new machine.

BOOST CONTROL MODULE

K&N’s new Boost Control Module works within factory parameters to increase boost—improving throttle response, and offering a power increase of up to 47 horsepower. The system can typically be installed in less than 30 minutes (no software required), and is adjustable on-the-go—helping you fine-tune your boost level to your preferences and needs. When you need more power, simply adjust the dial to give your acceleration a bit of extra muscle.

NEW BLACK OIL OPTION

K&N also introduced a new black oil option as a companion to the traditional red oil—allowing enthusiasts of blacked-out engine bays to customize their cotton air filter’s aesthetic to their preferences.

VEHICLES FEATURED AT K&N’S SEMA BOOTH

The Yamaha RD400 built by Nick O’Kane and his son Max

The Yamaha RD400 built by Nick O’Kane and his son Max

YAMAHA RD400 RETRO RACER

Nick O’Kane, a National Account Manager at K&N, introduced a custom Yamaha RD400 at the K&N booth at SEMA this year—a collaborative project with his son, Max, for his senior project at Riverside STEM Academy in Riverside, California.

The Yamaha RD400 air-cooled twin was launched in 1976 as a slightly more refined version of the Yamaha RD350. The bike was an instant hit, and highly sought after by many riders.

This minimalistic, retro racer RD400 came to life after O’Kane purchased the bike (in boxes) from a garage sale at Jeff Palhegyi Designs. JPD Designs had completed the frame modifications to convert the RD400 from twin-shock to mono-shock, which included fabrication of custom swingarm and triple trees to fit the race wheels from Marchesini. The gas tank had also been extended and tail unit designed to match. O’Kane and his son greatly enjoyed finishing the build, and adding their personal style to a solid foundation. Together, they would like to thank JPDesigns for their assistance with the build project.

2019 Chevrolet Silverado, featuring a prototype K&N intake system

On display was a 2019 Chevrolet Silverado, featuring a prototype K&N intake system

2019 CHEVROLET SILVERADO PROTOTYPE INTAKE

The research and development department at K&N created a prototype intake system for the 2019 Chevrolet Silverado—so keep your eyes out for a product release in the near future! K&N designs every intake system to provide increases in horsepower, helping you take your new (or new-to-you!) vehicle to its performance potential.

PICK YOUR FAVORITE BUILD + ENTER TO WIN AN INTAKE

K&N also introduced a build project that will be completed for SEMA 2019—a 1969 Chevrolet suburban—and has left it up to the public to decide from four awesome build choices. You can vote for your favorite option by following this link, and you’ll also be entered to win a free intake (please click on the link for full terms and conditions)! The entry period ends at 11:59 p.m. PST on November 11th, 2018.

Be sure to follow K&N’s Facebook page and Instagram to view exciting footage and images from SEMA 2018!

Build options for 2019 SEMA vehicle

Follow the link in the feature to vote for your favorite build option

Vaughn Gittin Jr. Is First to Drift the 12.9 Mile North Loop at Nürburgring

Vaughn Gittin Jr. drifting the Nürburgring

Vaughn Gittin Jr. drifting the Nürburgring

Drifting is not a sport for the faint of heart, and Vaughn Gittin Jr. is anything but. Since 2004—Formula Drift’s inaugural year—he has been a self-proclaimed “professional fun haver”; the rare combination of a fierce competitor with the heart and passion of a dedicated hobbyist. Always watchful for the next big challenge, Gittin Jr. recently completed a world first—drifting the entire north loop at Nürburgring.

Built in the 1920s in the Eifel mountains of Germany, the Nürburgring north loop (Nordschleife) is 12.9 miles of demanding turns with over 1,000 feet of elevation change. The former location for the German Grand Prix, the loop has earned the moniker “The Green Hell”. Gittin Jr. became the first driver to drift the entire course—demonstrating both his driving prowess and the power and agility of his Mustang RTR.

Vaughn Gittin Jr. drifting the Nürburgring

The Mustang RTR reached speeds of 150-mph on the track

Gittin Jr. began competing in Formula Drift in his personal Nissan S13, but quickly captured the attention of Ford Racing, who began a partnership with him in 2009. Ford and Gittin Jr. collaboratively launched the Mustang RTR in 2010. Today, Vaughn races in the Monster Energy Nitto Tire Ford Racing Mustang, which features a 900-horsepower, 9000-rpm engine built by Ford Performance and Roush Yates Engines.

Image of the RTR engine bay

The Mustang RTR features a 100-8578 filter assembly

He has an impressive list of wins—including three World Drift Series Championships (2011, 2012, and 2013), and the title of the only American to win two D1 Grand Prix events. He was honored as the Formula Drift Ace Driver of the Decade in 2013, which recognized his participation in all ten seasons of the series and the most tandem victories of any Formula Drift driver. He also owns RTR Motorsports (for which he races), based in Baltimore, Maryland.

Gittin Jr.’s Mustang RTR features a custom K&N® performance filter—which features the same technology as K&N®’s original High-Flow Air Filters, trusted for their ability to provide exceptional engine protection. You can search for one to fit your vehicle here. “I’ve been working with K&N on an official level for fifteen years now,” Gittin Jr. commented. “But prior to that, I ran K&N [products] on my first car that I used to race in industrial parks and parking lots. That started my love for K&N. It’s an honor, fifteen years later, to still be working with them. No matter what I’m doing—whether it is Formula Drift, Ultra4, or just general fun-having—and no matter where in the world I am, K&N Filters are ready to party with me and are my weapons of choice!"

You can see Vaughn Gittin Jr. compete in Round 8 of the Formula Drift Pro Series at Irwindale Speedway in Irwindale, California on October 12-13.