Latest News

Add 6.73 Horsepower to 2008-2014 Mitsubishi Lancer with K&N Air Intake Kit

Nov 3, 2008

The Mitsubishi Lancer has rally car looks and is among the most high-tech equipped cars on the market at its price. It offers touch screen navigation and Bluetooth capability.

K&N air intake system 69-6544TS for Mitsubishi Lancer

K&N designed a new air intake system (69-6544TS) with a silver powder coated finish for the 2008 to 2014 Mitsubishi Lancer with a 2.0 liter engine and 2010, 2011 and 2014 Mitsubishi Lancer with a 2.4 liter engine. K&N dynamometer tests show a 6.73 horsepower gain @ 5100 RPM with this air intake kit.

69-6544TS K&N air intake system installed in a 2008 Mitsubishi Lancer with a 2.0 liter engine

Dyno chart for 2008 Mitsubishi Lancer

The 69-6544TS was engineered to work within the Lancer’s computer specifications while maximizing power. The K&N intake tube allows free flowing air into the engine which results in an immediate power gain.

K&N engineers used the factory fresh air duct on this air intake system to ensure an ample supply of outside air. The fresh air inlet is necessary as the factory air box is located near the back of the engine bay. K&N’s design positions the mass air sensor on the tube for maximum performance. These changes are key ingredients for additional horsepower.

A K&N high flow air filter (RU-4950) treated with 1.06 oz of K&N filter oil is included in this air intake kit. The K&N washable and reusable air filter is also isolated from high engine temperatures by the heat shield. This also contributes to the increase in horsepower. The high-flow technology invented by K&N provides the best balance of airflow and filtration.

It takes less than 90 minutes to install most K&N air intake systems with common tools. K&N air intakes provide excellent filtration and come with the famous K&N Million Mile Limited Warranty.

The K&N 69-6544TS air intake system fits the following vehicles:
2014 MITSUBISHI LANCER 2.4L
2014 MITSUBISHI LANCER 2.0L
2013 MITSUBISHI LANCER 2.4L
2013 MITSUBISHI LANCER 2.0L
2012 MITSUBISHI LANCER 2.4L
2012 MITSUBISHI LANCER 2.0L
2011 MITSUBISHI LANCER 2.4L - Exc. LEV2 SULEV Test Group BMTXV02.4G6G
2011 MITSUBISHI LANCER 2.0L
2010 MITSUBISHI LANCER 2.4L - Exc. LEV2 SULEV Test Group AMTXV02.4G6G
2010 MITSUBISHI LANCER 2.0L - Exc. LEV2 SULEV Test Group AMTXV02.0G6G
2009 MITSUBISHI LANCER 2.4L
2009 MITSUBISHI LANCER 2.0L - Exc. LEV2 SULEV Test Group 9MTXV02.0G6G
2008 MITSUBISHI LANCER 2.0L

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2009 to 2016 Nissan GT-R Owners Gain a Lifetime of Performance With K&N

Nov 3, 2008

The Nissan GT-R was set to invade the U.S. performance car market and smash its competitors in the process. Boasting 473 horsepower fed by a twin- turbocharged V6 engine the GT-R leaves lesser vehicles in the dust.

K&N replacement air filter 33-2413

2009 Nissan GT-R

K&N has released a lifetime replacement air filter for the 2009 to 2016 Nissan GT-R (33-2413) that is designed to fit in your factory air box with no cutting or fitting required. Part 33-2413 contains both K&N air filters needed for the GT-R.

K&N replacement air filters are hand made in the United States from the finest materials available. They employ an oiled cotton media and are designed to increase horsepower and acceleration while providing top-notch engine protection.

K&N’s lifetime replacement air filters are washable and reusable and are backed by our original Limited Million Mile Warranty. These air filters will be the last your vehicle will ever need.

The K&N 33-2413 air filter fits the following Nissan GT-R:
2016 Nissan GT-R 3.8L V6
2015 Nissan GT-R 3.8L V6
2014 Nissan GT-R 3.8L V6
2013 Nissan GT-R 3.8L V6
2012 Nissan GT-R 3.8L V6
2011 Nissan GT-R 3.8L V6
2010 Nissan GT-R 3.8L V6
2009 Nissan GT-R 3.8L V6

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2007 through 2012 Nissan Sentras Gain 6.69 Horsepower with K&N Air Intake System

Nov 3, 2008

Nissan’s 2008 Sentra hit the sport-compact market with a the right mix, it has performance and great style.

K&N air intake system 69-7001TTK for Nissan Sentra

K&N has designed a new air intake system (69-7001TTK) for the 2007, 2008, 2009, 2010, 2011 and 2012 Nissan Sentra with a 2.5 liter engine. K&N dynamometer tests show a 6.69 horsepower gain @ 5900 RPM with this air intake.

69-7001TTK K&N air intake system prototype installed in a 2007 Nissan Sentra with a 2.5 liter engine

Dyno chart for 2007 Nissan Sentra

It has a black powder-coated finish and is engineered to work within the Sentra’s computer specifications. The mandrel bent K&N intake tube gives an OE look to the performance intake system which allows air to flow with little restriction.

The 69-7001TTK uses the factory fresh air duct to ensure an ample supply of outside air. The use of the fresh air inlet is necessary as the factory air box is located near the back of the engine bay. The mass air sensor adaptor is precision CNC machined, 6062 billet aluminum for accurate mass air flow sensor readings.

A K&N high flow air filter (RU-3700) treated with 0.70 oz of K&N filter oil is included in this air intake system. The K&N washable and reusable air filter is also isolated from high engine temperatures by the heat shield which also contributes to the increase in horsepower. Our air filters are engineered to provide increased surface area for long service intervals and excellent engine protection.

Backed by the famous K&N Million Mile Limited Warranty, K&N provides the best balance of airflow and filtration. Our air intake kits are easy to install usually in 90 minutes or less with common hand tools.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Midget Racer Led 50 Laps to Capture the DuPont Gold Crown Nationals

Oct 30, 2008

K&N sponsored Jerry Coons Jr. and the Wilke-PAK Motorsports took home the prize purse in one of the highest paying midget races of the season, the DuPont Gold Crown Midget Nationals.

DuPont Gold Crown Midget Nationals dominated by Jerry Coons Jr. at Tri-City Speedway

Coons won the Gold Crown at the Tri-City Speedway in Granite City, Illinois. The event showcased 61 of the best midget teams in the country. They competed for over $90,000 in purse money, with a 28 car field receiving $1,000 to participate in the A-main. The USAC National/POWRi co-sanctioned event paid $15,000 to the feature winner.

The USAC National/POWRi co-sanctioned event paid $15,000 to Coons

Coons rolled into Victory Lane after leading all 50 laps from start to finish at the inaugural event. He drove the USAC national midget with a 4-cylinder Gary Station engine powered by Mopar. It weighs about 900 pounds and puts out 385 horsepower.

“We use K&N products because we get better filtration and horsepower,” said Chris Wilke, of Wilke-PAK Motorsports. “We’ve been a family team since the 1930s and have used K&N filters long before we were sponsored by K&N.”

The Gold Crown Midget Nationals showcased some of the best drivers from around the country and was one of the last USAC events of 2008.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Turbocharged 2008 to 2014 Subaru Impreza WRX Gains 14.28 HP with K&N Air Intake Kit

Oct 29, 2008

The 2008 Subaru Impreza WRX handles like a rally car with a scoop on the hood for its 2.5 liter four-cylinder intercooled turbocharger engine.

K&N's 69-8004TTK air intake system for the 2008 to 2014 Subaru Impreza WRX with a 2.5 liter engine

2008 Subaru Impreza WRX

K&N has developed an air intake system (69-8004TTK) for 2008 to 2014 Subaru Impreza WRX with a 2.5 liter engine. K&N dynamometer testing shows a 14.28 horsepower gain at 5228 rpm.

K&N air intake system prototype installed in 2008 Subaru WRX

Dyno chart for 2008 Subaru Impreza WRX

The 69-8004TTK features a aluminum intake tube in powder coated black and a K&N carbon fiber top filter (RP-5113). Our lifetime washable and reusable air filter is isolated by a steel heat shield to provide fresh air to the engine.

The horsepower gain is also aided by the radius adaptor’s design as it smoothly takes the 5 inch flange of the air filter and connects it with the air intake tube. The air intake tube has a CNC precision machined billet mass air adaptor.

The high-flow technology invented by K&N provides the best balance of airflow and filtration. Designed to be installed with simple hand tools in 90 minutes or less, our K&N air intake systems are backed by the K&N Million Mile Limited Warranty.

The 69-8004TTK air intake system fits the following Subaru Imprezas:
2014 Subaru Impreza WRX 2.5L
2013 Subaru Impreza WRX 2.5L
2012 Subaru Impreza WRX 2.5L
2011 Subaru Impreza WRX 2.5L
2010 Subaru Impreza WRX 2.5L
2009 Subaru Impreza WRX 2.5L
2008 Subaru Impreza WRX 2.5L - US

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Previous Page 1 ... 861 862 863 864 865 ... 1063 Next Page