The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In the powerhouse SUV family the Denali, Yukon, Suburban, Avalanche and Escalade are all related. These vehicles range from very upscale to luxury models.
K&N Engineering 57-3058 for 2007 Yukon, Denali, Sierra, Chevy Tahoe, Chevy Suburban, Chevy Silverado, Avalanche and Cadillac Escalade
K&N Air Intake 57-3058 Installed in 2007 GMC Yukon with a 5.3 liter V8 engine
K&N Engineering has developed a performance air intake system (57-3058) that is street legal in 50 states for these vehicles. See the complete applications list below. K&N dynamometer testing shows an estimated 17.54 horsepower gain at 4917 rpm.
2007 Chevrolet Avalanche
Dyno chart for 2007 GMC Yukon with a 5.3 liter V8 engine
The original factory air box and original filter are restrictive in this series of SUVs. The design of the K&N intake tube and the K&N replacement air filter (RF-1042) with radius adaptor are some of the reasons why K&N was able to get so much additional power. The stock mass air sensor was also repositioned to help with the horsepower gains. The round tapered chrome top K&N air filter fits into the engine compartment using factory holes and mounting points to let cool fresh air into the engine.
The 57-3058 also comes with a removable lid that goes over the top of the heat shield. This is designed to keep out any heavy debris. However, with or without the lid the horsepower increase is essentially the same.
It takes 90 minutes or less to install this kit using simple hand tools. The
57-3058 also comes with the famous K&N Million Mile Limited Warranty. Take a look at our 57-3058 installation video to see all the steps involved.
Applications are as follows:
2008 GMC YUKON XL 1500 6.2L V8
2008 GMC YUKON XL 1500 6.0L V8
2008 GMC YUKON XL 1500 5.3L V8
2008 GMC YUKON DENALI XL 6.2L V8
2008 GMC YUKON DENALI 6.2L V8
2008 GMC YUKON 5.3L V8
2008 GMC YUKON 4.8L V8
2008 GMC SIERRA DENALI 6.2L V8
2008 GMC SIERRA 1500 6.0L V8
2008 GMC SIERRA 1500 5.3L V8
2008 GMC SIERRA 1500 4.8L V8
2008 CHEVROLET TAHOE 5.3L V8
2008 CHEVROLET TAHOE 4.8L V8
2008 CHEVROLET SUBURBAN 1500 6.0L V8
2008 CHEVROLET SUBURBAN 1500 5.3L V8
2008 CHEVROLET SILVERADO 1500 6.0L V8
2008 CHEVROLET SILVERADO 1500 5.3L V8
2008 CHEVROLET SILVERADO 1500 4.8L V8
2008 CHEVROLET AVALANCHE 6.0L V8
2008 CHEVROLET AVALANCHE 5.3L V8
2008 CADILLAC ESCALADE 6.2L V8
2007 GMC YUKON XL 1500 6.0L V8
2007 GMC YUKON XL 1500 5.3L V8
2007 GMC YUKON DENALI. 6.2L V8
2007 GMC YUKON DENALI XL. 6.2L V8
2007 GMC YUKON 5.3L V8
2007 GMC YUKON 4.8L V8
2007 GMC SIERRA DENALI 6.2L V8
2007 GMC SIERRA 1500 6.0L V8
2007 GMC SIERRA 1500 5.3L V8
2007 GMC SIERRA 1500 5.3L V8
2007 GMC SIERRA 1500 4.8L V8
2007 CHEVROLET TAHOE 5.3L V8
2007 CHEVROLET TAHOE 4.8L V8
2007 CHEVROLET SUBURBAN 1500 6.0L V8
2007 CHEVROLET SUBURBAN 1500 5.3L V8
2007 CHEVROLET SILVERADO 1500 6.0L V8
2007 CHEVROLET SILVERADO 1500 5.3L V8
2007 CHEVROLET SILVERADO 1500 5.3L V8
2007 CHEVROLET SILVERADO 1500 4.8L V8
2007 CHEVROLET AVALANCHE 6.0L V8
2007 CHEVROLET AVALANCHE 5.3L V8
The 2007 Jeep Compass entered a segment of the automotive market that already has many established players. It plans to attract non-traditional Jeep buyers with its compact SUV design. The 2007 Dodge Caliber performs well, and like the Jeep, is a crossover vehicle.
K&N Air Intake 57-1552 for Jeep Compass and Dodge Caliber
K&N Engineering, Inc. has manufactured a 50 US State street legal air intake (57-1552) for the 2007 to 2010 Jeep Compass 2.0 liter and 2.4 liter engine and for all three engine options of the 2007 to 2010 Dodge Caliber. The Dodge Caliber comes with the option of a 1.8 liter, 2.0 liter or 2.4 liter engine.
Dyno chart for 2007 and 2008 Dodge Caliber 2.4 liter engine
"The factory tube has an accordion shaped connection in the middle of an s-shaped bend," said K&N Performance Kit Manager Bert Heck. "Its accordion shaped rings are restrictive compared to the K&N engineered air intake." K&N dynamometer testing shows a horsepower gain of 7.94 @ 4557 RPM on the 2.4 liter engine.
For maximum performance simply replace the factory tube and airbox with K&N's air intake system. The 57-1552's tube is smooth with no accordion rings, said Heck. "The heat shield isolates the K&N Air Filter (RU-4730) from the heat of the engine and attaches to a factory fresh air duct," he said. "This means more air gets to the engine resulting in more power."
It takes less than an hour to install this kit. The lifetime K&N Air Filter comes with the famous K&N Million Mile Limited Warranty.
The 2006 Ford F350 Super Duty 6.8 Liter V10 can tow a staggering 17,000 pounds outfitted with a fifth-wheel hitch. K&N Engineering has a Performance Air Intake Kit (57-2567) available for this heavy-duty pickup.
K&N's 57-2567 FIPK Gen II Intake System for 2005 and 2006 Ford F-250 and F-350
K&N has the same system available for the 2005 Ford F350 Super Duty, and the 2005 Ford F350 Harley Davidson Super Duty 6.8 Liter V10. Other vehicles this intake fits are the 2006 and 2005 Ford F250 Super duty; and the 2005 Ford F-250 Harley Davidson Super Duty 6.8 Liter V10.
Dyno chart for 2005 Ford F-250 6.8 liter engine
With the addition of K&N Engineering's new Air Intake System, Ford Super Duty owners can realize a 16+ horsepower gain. K&N's Research and Development Department tested a 2005 Ford F250 6.8 liter V10 on our in-house dynamometer. Results showed a 16.21 horsepower gain @ 4450 RPM.
K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to pull in air with ease compared to the OEM air filter assembly. More air means more power and torque when you need it. With the 57-2567, consumers towing heavy loads should see a difference in performance.
This air intake system uses a conical shaped chrome top high-flow air filter (RC-4630) and powder coated aluminum heat shield in place of the vehicle's stock air box. The result is an air filter that captures harmful particles, provides more surface area, flows more air, and increases service life. This K&N air filter performs for up to 100,000 miles before service is required depending on driving conditions. Improving the air path between the filter and the motor is the rotationally-molded high density polyethylene tube. It offers the most flexibility in design and outstanding horsepower numbers. It takes about 90 minutes or less to install this system with simple hand tools. It is covered by K&N's Famous Million Mile Limited Warranty™ and is 50 state street legal.
Austrian motorcycle manufacturer KTM began it's full production
of motorcycles in 1953 and is known for being a leading innovator of off-road
motorcycle technology. For example, they were the first manufacturer to produce liquid-cooled
four-stroke motorcycle engines and front and rear disc brakes for off road
motorcycles.
K&N is proud to introduce it's KN-652 replacement oil filter for select 2007 to 2016 KTM 530, 505 and 450 off-road motorbikes. The KN-652 contains a modern synthetic filter media, designed for ultimate flow with less
pressure drop, yet engineered for outstanding filtration to meet or exceed all
OEM specifications.
K&N Oil Filters are designed to satisfy the needs of racers and engine builders
as well as the average motorcycle or ATV owner who wants the best oil filter
available. K&N Oil Filters are covered by a limited
warranty to be free from defects in materials and workmanship when installed and
replaced using engine and equipment manufacturer's recommended service
intervals.
K&N's KN-652 Replacement Oil Filter for several KTM Motorcycle models
Mitsubishi unveiled the 2008 Colt at the Frankfurt Motor Show because of its best seller status in Germany. The Colt is also a staple in the European market, especially in Italy and Spain.
K&N Engineering's 57-0672 for the Mitsubishi Colt 1.5 liter engine and Mitsubishi Colt 1.3 liter engine.
K&N Engineering has developed a performance air induction system, the 57-0672, for several European models of the Mitsubishi Colt. See the complete applications list below.
The K&N air intake system is equipped with a K&N lifetime air filter. The cold air hose is positioned toward the bumper vent to obtain a steady supply of cool fresh air. The silicone hose is designed to replace the vent hose from the stock air system. K&N designed this induction kit to achieve extra horsepower by picking up the coolest air possible
Custom mounting hardware to fit specific European Colt models is also included. This hardware allows the K&N air filter to remain firmly in place so it feeds cool free flowing air into the engine to help improve performance. K&N also provides a stabilizer with brackets. All adaptors are made from high quality materials such as steel, aluminum, silicone or reinforced nylon for longevity.
K&N air intake kits are easy to assemble, usually in 90 minutes or less and come with the famous K&N Million Mile Limited Warranty. Once assembled the
57-0672 is designed to free your vehicle from much of the original air box restriction while providing power gain and excellent filtration.
Applications are as follows:
2012 MITSUBISHI COLT VI 1.3L L4
2011 MITSUBISHI COLT VI 1.3L L4
2010 MITSUBISHI COLT VI 1.3L L4
2009 MITSUBISHI COLT VI 1.3L L4
2008 MITSUBISHI COLT VI 1.5L L4 - exc. Turbo
2008 MITSUBISHI COLT VI 1.3L L4
2008 MITSUBISHI COLT CZC CABRIOLET 1.5L L4 - exc. Turbo
2007 MITSUBISHI COLT VI 1.5L L4 - exc. Turbo
2007 MITSUBISHI COLT VI 1.3L L4
2007 MITSUBISHI COLT CZC CABRIOLET 1.5L L4 - exc. Turbo
2006 MITSUBISHI COLT VI 1.5L L4 - exc. Turbo
2006 MITSUBISHI COLT VI 1.3L L4
2006 MITSUBISHI COLT CZC CABRIOLET 1.5L L4 - exc. Turbo
2005 MITSUBISHI COLT VI 1.5L L4 - exc. Turbo
2005 MITSUBISHI COLT VI 1.3L L4
2004 MITSUBISHI COLT VI 1.5L L4 - exc. Turbo
2004 MITSUBISHI COLT VI 1.3L L4
